The experts' fertilizer advice for the walks on Saturday is here:
Everest — Swix
The advice from Everest is based on test walks on Friday, April 14 at 08:00-12:00.
GLIDE 1: Racing:
- Iron Swix DHBFF Marathon into the base of the ski. Let the wax cool down before scraping off. Then brush with steel or bronze brush.
- Apply TSP8 powder. Iron the powder at 160°c. Let it cool down before brushing it with a bronze or steel brush.
- Polish the base with a blue nylon brush.
- Rill with 1mm linear the entire base
Glide 2: Touring
- Iron Swix PS8 or HS8 into the base. Let the wax cool down before scraping off. Then brush with bronze or steel.
- Spray Swix HS7 Liquid or TS7 Liquid. Let dry, then use a red or blue nylon brush.
Grip:
1. Sand the base zone.
2. Apply a thin layer of KX20 Green Base adhesive – Cool it very well
3. KN44 Nero klister- let cool- VP50 kickwax cover-cork lightly
Skinski:
We recommend cleaning the skin with Swix N22 Skincleaner and then use N21 Skin boost.
The mountain hut — Toko
Flow: Start with a hard flow (eg blue High Performance). Scrape and brush and then red High Performance.
Base: Green Toko Base.
Fix: A mixture of yellow and red Toko glue.
GG Sport — Rode
The flow is based on the best, we can always offer the first two options, even three.
Flow:
1x RODE GL40 brush/scraper
1x RODE LF 40 brush/scraper
1x Rode HF 40 brush/scraper
1x Rode F40 powder, brush
Fatt/Kickwax:
1 thin layer of Rode Klister K-10 blue, ironed on
1 layer of Rode K76 multigrade or T-line KM3
Cool the skis well, then apply a layer of RodeV40 Violet/ T-line VXPS
Our expert waxing recommendations for the Saturday race are here:
Everest — Swix
WAX TIP FOR THE WATERFALL WALK based on testing 14.4 at 08:00-12:00
Weather at start. 15.4
GLIDE 1: Racing:
- Iron Swix DHBFF Marathon into the base of the ski. Let the wax cool down before scraping off. Then brush with steel or bronze brush.
- Apply TSP8 powder. Iron the powder at 160°c. Let it cool down before brushing it with a bronze or steel brush.
- Polish the base with a blue nylon brush.
- Rill with 1mm linear the entire base.
Glide 2: Touring
- Iron Swix PS8 or HS8 into the base. Let the wax cool down before scraping off. Then brush with bronze or steel.
- Spray Swix HS7 Liquid or TS7 Liquid. Let dry, then use a red or blue nylon brush.
Grip:
1. Sand the base zone.
2. Apply a thin layer of KX20 Green Base adhesive – Cool it very well
3. KN44 Nero klister- let cool- VP50 kickwax cover-cork lightly
Skinski:
We recommend cleaning the skin with Swix N22 Skincleaner and then use N21 Skin boost.
The mountain hut — Toko
Glide: Start with a layer of hard (eg blue High Performance). Scrape and brush and then red High Performance.
Base: Green Toko Base.
Grip: Mix of yellow and red Toko klister.
GG Sport — Rode
Glide:
1x RODE GL40 brush/scrape
1x RODE LF 40 brush/scrape
1x Rode HF 40 brush/scrape
1x Rode F40 powder, brush
Fatt/Kickwax:
1 thin layer of Rode Klister K-10 blue, ironed
1 layer of Rode K76 or T-Line KM3
Cool the skis well, then add a kickwax Rode V40 Violet/T-line VXPS
